Steve Capel
25-03-2003, 10:42
Please be warned that certain of these lights have a manufacturing fault which causes the bulb connectors to become unsoldered due to heat from the bulb. The wrong type of solder was used in manufacture.
Test by fitting new batteries and hanging upside down for 10 mins, tap gently and bulb with connectors will fall out if your unit has this problem.
Issue is acknowledged by PrincetonTech.
Dont take this torch diving until you have checked it out!
Test by fitting new batteries and hanging upside down for 10 mins, tap gently and bulb with connectors will fall out if your unit has this problem.
Issue is acknowledged by PrincetonTech.
Dont take this torch diving until you have checked it out!