Miscellaneous Sales and Wanteds

[Gordon Clarke]

Sales :
I have just bought a new Tekwing Lite and have fitted a scubapro air2 to it in place of the fitted buddy ap200 so if anyone wants a brand new buddy ap200 inflator £25
If you also want the new low pressure hose with it £45 the two.
R190 Scubapro octopus, good condition and regularly serviced £25
New NDiver pressure gauge (in black rubber housing) with integral temp scale. £25
Dry gloves (orange ribbed type with knitted red inner gloves) - £8
Also a Scubapro MK25AF Regulator Set
(DIN fitting) with an attached S600 2nd stage. They are in excellent condition but as with most second-hand scuba gear a service before use is recommended. £150
I have owned these from new but have upgraded to some new regs.

Wanteds : APValves Air2 lowpressure hose to fit air2 I have acquired.
Also looking for xxxl fins that go onto size 10 drysuit boots easily! Cheap please.
Also my buddy is looking for some twin 12"s.
In Wolverhampton area and can supply pictures if you want. Will post at cost or possibly free for some of the items.

[Mark Papp]

Sales :
I have just bought a new Tekwing Lite and have fitted a scubapro air2 to it in place of the fitted buddy ap200

Wanteds : APValves Air2 lowpressure hose to fit air2 I have acquired.

Gordon, is the S/pro fitting identical to the AP fitting?

[Sam Johnston]

Hi Gordon

Would you consider splitting the Mk25 and S600?

[Gordon Clarke]

Gordon, is the S/pro fitting identical to the AP fitting?

The scubapro air 2 has a slightly longer 'spout' for fitting to the corrugated lp hose than the ap200 and is a fraction larger in diameter but the tekwing hose will fit over it and seal with a cable tie. I may also change the corrugated hose itself making an alternative connection at the rear post.
I also have an apvalves auto air which as you know is an upgrade alternative to the ap200 on buddy jackets and the spout on this is more or less the same as the scubapro air2.
As for the lp hoses they are all different in their connection at the inflator. The autoair hose connector is the same shape as the scubapro air2 one but marginally bigger. The ap200 lp hose connector is more modern and common to a lot of other inflator valves. Hence I am happy to keep the hose.
Hope this is of help.
Personally I just can't stand the little blue domed button on apvalves gear.

[Gordon Clarke]

Hi Gordon

Would you consider splitting the Mk25 and S600?

Hi Sam
Depends which one you want. If the s600 I have the r190 octopus so could make up a pony set I suppose. If the mk25 I have an s600/r190 set needing a first stage. You obviously have a mix and match in mind with another set.
Would have to be the right offer to split though as you are no doubt aware.

[graham nurse]

If the AP200 is still for sale I will have it + the hose.

Graham

[Gordon Clarke]

If the AP200 is still for sale I will have it + the hose.

Graham

Yes Graham it is. Could you pm me for contact details and we can sort out transfer. I can send you a picture if you like but they are brand new and never been near water yet, let alone in it.

[iain1965]

I have a Scubapro AIR 2 adaptor that connects to a standard regulator hose, this is brand new and never been used, you can have it for £15

511

[MattS]

Also my buddy is looking for some twin 12"s.I have a set of 12s, CD bands and a scubapro manifold with sherwood knobs on. I am a bit far away though. You ever get down to Portsmouth diving?

[Gordon Clarke]

I have a Scubapro AIR 2 adaptor that connects to a standard regulator hose, this is brand new and never been used, you can have it for £15

511

Thanks for the offer Iain. I am specifically after the apvalves autoair lp hose (I mistakenly called this an air2 one but strictly air2 only applies to the scubapro version). Good offer though. will mull on it.

[Gordon Clarke]

I have a set of 12s, CD bands and a scubapro manifold with sherwood knobs on. I am a bit far away though. You ever get down to Portsmouth diving?

Possibly when it gets warmer. Joking aside how much are you looking for for the twin12 setup and rough age of the rig? Will pass this on to my buddy shortly. Thanks.

[MattS]

Possibly when it gets warmer. Joking aside how much are you looking for for the twin12 setup and rough age of the rig? Will pass this on to my buddy shortly. Thanks.PM sent.

[Gordon Clarke]

Sorry

[john1959]

Ive a ap valves auto air 2 with hose that Ive just removed off my new Tekwing couple of dives so light marks also a set of twin 12s 232 MDE manifold and banded

[Gordon Clarke]

Ive a ap valves auto air 2 with hose that Ive just removed off my new Tekwing couple of dives so light marks also a set of twin 12s 232 MDE manifold and banded

Could you give an idea of price wanted for the twin 12's please.

[john1959]

Around £250